Description
HAD 16/16 Height Adjuster.
Can be used with RA 350/M16, RA 500, RA 800, RAEM M16, RAEM 800, Cushyfloat 17-1609, SIM 200 anti-vibration mounts.
The height adjusters are available in various sizes to suit the small to medium range of Trelleborg Industrial AVS stands. Using height adjusters, new supports can be adapted to existing applications, where original spare parts are unobtainable.
Installation Tips:
– to obtain excellent results where very small coupling tolerances are required, it is recommended to wait 48 hours before carrying out the final alignment.
– to secure the bolt in the support it is recommended to apply Loctite.
HAD is a height adjuster made of grade 8 anti-corrosion steel. The steel is galvanized and chromed according to DIN 50691/ISO 2081.
Comes complete with:
– washer and nut to be fixed to the support
– two nuts and a tightening washer to be fixed to the base of the motor.
The HAD height adjuster facilitates precise engine alignment and is also excellent in the shipbuilding industry.
MAIN DIMENSIONS
H = 110 mm
D = M16
E = M16A = DAF 24
B = 24 mm
C = DAF 12
F = 10mm
1 (Washer) 50 x 15 x 3
4 (Tightening Nut with Plastic Insert) M16
5 (Fine Thread Unit, Adjuster) M30 x 1.5
Reviews
Still no reviews.